Betso WTCS-1
RF transmission
Our whole new concept of wireless transmission of time code and status information is ideal for simple on stage workflow control. Each device connected to the network will be continuously jammed from transmitter and on each device you can observe status information of all other devices in the network.
The operating range is up to 500m within the line of sight. The RF protocol incorporates frequency hopping spread spectrum technology approach which ensures robust functionality even in the environment with high RF noise.
When unit set as receiver is out of the RF range, it keeps generating synced timecode.
All Timecode Formats
The WTCS-1 can receive, precisely jam or start to generate new time codes of all existing SMPTE time code formats.
1" Super-bright graphical LED display with Anti-glare Surface
Ambient light independent time code readouts are guaranteed thanks to a large, 1-inch high, super-bright graphical LED display with a special anti-glare surface that avoids sun reflection. Its brightness can be easily adjusted in ten modes to meet actual light conditions or can be set automatically in relation to actual ambient light conditions thanks to integrated sensor.
Writing sheet backlight and anti-scratch protection
For easy writing sheet information readout BETSO WTCS-1 has implemented it's adjustable backlight. The brightness of the backlight can be set in three steps of brightness intensity or completely turned off.
BETSO WTCS-1 comes with applied writing sheet protector, which furthermore protects already very robust mechanical construction. In the case of accidental damage of the writing sheet protector it is matter of few seconds to install the new one.
Ultra Highly Accurate TCXO
Embedded high precision temperature compansated crystal oscillator TCXO with frequency accuracy off 0.2 ppm is the fundamental piece of hardware for stable and accurate timecode generator.
The superior quality of TCXO is best suited for changing environmental conditions where temperatures vary a lot during the day. Even in extreme weather conditions, the WTCS-1 will keep timecodes in sync.
Solid and Precise Mechanical Construction with Reduced Weight and Decent Dimensions
During the development phase, special focus was kept on the infield daily use. Therefore the main body is made from very stiff anodized aluminium alloy using CNC milling and laser cutting technologies. This was the only way to get a very robust, but still as small and as lightweight a device as possible.
The highest in quality demands were also put on the details which led to stiff wood utilization in the arms of the slate, sealing on the battery door and high quality writing sheets with optional protection labels (accessory).
MovieSlate 8 cooperation over WiFi
The new BETSO WTCS-1 digital smart slate can sync timecode, user bits, slate data and user-selectable credits information over it's built-in WiFi network directly to MovieSlate 8 application.
When connected with MovieSlate 8 application, it can be selected how long to display each piece of data, and on which events to show credits - Sticks Open/Clap, Shot End
Between more than 60 available credits information which can be synced with BETSO WTCS-1 are: Roll, Scene, Take, Prod, Dir, Dp, Title, Slate, Date, Cam, FPS, ISO Speed, Lens, Filters, HDR, Sound Media, Sound Filename and much more.
Powering
The BETSO WTCS-1 digital smart slate is powered by six AA batteries, which are able to power the device for up to 100 hours of continuous time code generation. This outstanding performance is achieved by very careful design of power management circuitry and the use of very efficient LED display.
In the case of battery discharge the BETSO WTCS-1 has inbuilt backup battery, which can keep time code generating for next 3 hours, so there is plenty of time for safe battery replacement without loosing the time code sync.
Technical Specifications
| Display | Graphical 1“ high, white LED display with adjustable brightness |
| Dimensions (h x w x d) | 230 x 185 x 24 mm (9.0" x 7.3" x 0.9") |
| Weight (w/o batteries) | approx. 760g (1.68 lb) |
| Mechanical construction | CNC milled, anodized aluminium alloy and stiff wood |
| Powering | 6x AA battery (alkaline or lithium) / 6x accu (NiMH, NiCd) |
| External powering 6 - 15 V DC | |
| Current consumption | approx. 30 - 1000 mA * |
| approx. 4 mA in stand-by mode (arms of the slate closed) | |
| Battery life | Up to 100 hours ** |
| SMPTE TC formats | 23,976 fps - 30 fps including DF and NDF (also 2x multiples: 23.976 fps - 60 fps supported) |
| Input TC sensitivity | 0.2 - 10 V (p-p) |
| Frequency range | 902 - 928 MHz (USA/Canada) |
| 863 - 870 MHz (Europe) | |
| 920.6 - 923.4 MHz (Japan) | |
| Number of channels | 5 |
| RF output power | 10mW (10dBm) |
| Operating range | up to 500m *** |
En PickAudio, nuestro objetivo es proporcionar opciones de entrega claras y convenientes para nuestros clientes. Utilizamos UPS como nuestro servicio de entrega estándar internacional y Nacex como servicio de entrega en España (Península) y Portugal, aunque nos reservamos el derecho de utilizar otros servicios de mensajería si es necesario, asegurando siempre que tu pedido llegue de manera segura y eficiente. A continuación, encontrarás detalles sobre nuestros servicios de envío, costos asociados y tiempos estimados de entrega.
TABLA DE PRECIOS
| Zona | Destinos | Tiempo de Entrega | Precio de Envío | Envío Gratuito en compras superiores a |
|---|---|---|---|---|
| 1 | España (ES), Portugal (PT) | 24-48h | €9 | €200 |
| 2 | Francia (FR), Italia (IT), Alemania (DE), Reino Unido (UK), Bélgica (BE) | 2-5 días | €17,99 | €400 |
| 3 | Países Bajos (NL), Luxemburgo (LU), Austria (AT), Irlanda (IE), Andorra (AD), Mónaco (MC) | 3-6 días | €19,99 | €500 |
| 4 | Polonia (PL), República Checa (CZ), Dinamarca (DK), Hungría (HU), Suiza (CH), Liechtenstein (LI), Finlandia (FI), Rumania (RO), San Marino (SM), Eslovaquia (SK), Eslovenia (SI), Suecia (SE) | 4-8 días | €24,99 | €650 |
| 5 | Croacia (HR), Serbia (RS), Bulgaria (BG), Bosnia y Herzegovina (BA), Albania (AL), Macedonia del Norte (MK), Montenegro (ME), Grecia (GR), Turquía (TR) | 4-10 días | €29,99 | €950 |
| Resto del Mundo | Fuera de las zonas anteriores | Varía según el destino | €44,90 | €1.500 |
INFORMACIÓN ADICIONAL DE ENVÍO
Seguimiento de tu Pedido: Proporcionaremos información de seguimiento una vez que tu pedido esté en camino, permitiéndote rastrear el progreso de tu entrega.
Sobredimensionados y Peso Excesivo: Los artículos de gran tamaño o peso pueden incurrir en cargos adicionales, lo cual se comunicará antes del envío.
Restricciones Territoriales: Algunos productos pueden tener restricciones de venta en ciertos territorios. Si esto afecta a tu pedido, nos pondremos en contacto contigo directamente.
Procesado del envío: Para que podamos enviar el pedido en el mismo día, es necesario hacerlo antes de la 13:00 hora Española para envíos internacionales y antes de las 16:30 para envíos en península.
*En caso de tener alguna pregunta, no dude en contactar con nosotros vía email o utilizando el chat disponible en la parte inferior izquierda.
